The Brutal Distortion
Available NOW! The first batch is nearly gone with the next coming early June (potentially and hopefully sooner).
Our latest high gain creation! With a powerful tonestack, searing gain and simulated power amp distortion via the Post Gain control, it may be the most brutal pedal to ever bear the name.
Volume: This is the most obvious. It makes the pedal louder.
Low: The Low control will fine tune how much bass and chunk are coming out of your pedal. There are no "wrong" settings, but lower settings may seem thing with lower settings of the Post control.
Mid: The Mid control on this pedal gives you just what you need. This takes you all the way from 90's Scooped Mids to a full on mid frequency overload.
High: Here's where you dial in how much treble and sizzle you want in your tone. Higher settings will bite and cut like a knife while lower settings will be much smoother and warmer.
Pre: You can't have distortion without gain! From a light crunch up to thick, saturated gain, this controls the amount of distortion that the Preamp section is generating.
Post: Here's where you get to decide how Brutal your tone is. Simulating the interaction between a preamp, the phase inverter and power amp, this super handy control offers a huge amount of tweakability. Starting at the lowest point, you will find drier, tighter tones. As you raise it, the audible distortion will increase and thicken things up even more. The higher you go, the more Brutal it becomes. There is no "wrong" setting here at all. Every position on the control from minimum to maximum is very usable and wont destroy your signal at any point.
Power: The Brutal Distortion is designed to be run at 9volts Only.
Graphics by Remy Cooper of Headsplit Design.
Volume/Pre/Post/Low/Mid/High Controls
2 Year Warranty
True Bypass
Powered by 2.1mm negative tip 9Volt DC adapter (Sold Separately)
Current Draw 20-30mA
Hand Built in Canada
Our latest high gain creation! With a powerful tonestack, searing gain and simulated power amp distortion via the Post Gain control, it may be the most brutal pedal to ever bear the name.
Volume: This is the most obvious. It makes the pedal louder.
Low: The Low control will fine tune how much bass and chunk are coming out of your pedal. There are no "wrong" settings, but lower settings may seem thing with lower settings of the Post control.
Mid: The Mid control on this pedal gives you just what you need. This takes you all the way from 90's Scooped Mids to a full on mid frequency overload.
High: Here's where you dial in how much treble and sizzle you want in your tone. Higher settings will bite and cut like a knife while lower settings will be much smoother and warmer.
Pre: You can't have distortion without gain! From a light crunch up to thick, saturated gain, this controls the amount of distortion that the Preamp section is generating.
Post: Here's where you get to decide how Brutal your tone is. Simulating the interaction between a preamp, the phase inverter and power amp, this super handy control offers a huge amount of tweakability. Starting at the lowest point, you will find drier, tighter tones. As you raise it, the audible distortion will increase and thicken things up even more. The higher you go, the more Brutal it becomes. There is no "wrong" setting here at all. Every position on the control from minimum to maximum is very usable and wont destroy your signal at any point.
Power: The Brutal Distortion is designed to be run at 9volts Only.
Graphics by Remy Cooper of Headsplit Design.
Volume/Pre/Post/Low/Mid/High Controls
2 Year Warranty
True Bypass
Powered by 2.1mm negative tip 9Volt DC adapter (Sold Separately)
Current Draw 20-30mA
Hand Built in Canada